Leica TPS700 Series Field Manual - Surveying Equipment

Setting OutSetting Out Coordinates from MemoryThe application computes settingoutelements for the polar,cartesian or orthogonal settingout of points using either coordinatesor manually enteredangle, horizontal distance andheight. Setting out differencescan be displayed continuously.In the Setting out program threedifferent displays are availableshowing setting out valuescorresponding to the relevantmethod.Switches the display andmethod.A point search with the wildcardcriterion (*) is automaticallyperformed on starting setting-out,i.e. the last point measured/entered is displayed first, fixedpoints before measurements.Points can be easily selected byscrolling through with /Additionally, the type of the pointfound (fixed point or measuredpoint) is displayed.Input a point number.If the desired point number couldnot be found the system opensthe manual coordinate entryautomatically.2D SET OUT 1/4PtID : C1*P100Type : FixpointDist : 10.200 mHz : +30°25'14": 4.782 m >>2D Switches the instrument to"Manual input of setting outvalues".61