Leica TPS700 Series Field Manual - Surveying Equipment

Switching functions onand off (e.g. ATR) can bedone with the short cut SHIFT +FNC (FNC menu is called up).After completing the firstmeasurment of all defined pointsin face 1, motorized instrumentsposition themselves automaticallyon the current point to bemeasured in face 2 (dependingon the settings in the configurationsmenu).If in the configuration menumeasuring method I/IIàI/II wasselected, make sure that all pointswere measured in both faces.Only then will bedisplayed, meaning that automaticmeasurement is now possible.For automatic measurementsall target pointsmust have prisms and the ATRmust be on.If ATR is not on at a target, theinstrument stops at that target.The point has to be measuredmanually.89