Leica TPS700 Series Field Manual - Surveying Equipment

Start with setIn the first line the set with whichthe automatic measure-mentshould start is defined. Thisselection is useful if several setswere already manually measured.Basically the next set to bemeasured is displayed. If analready measured set is selectedwith the arrow keys then afterpressing a quiery isdisplayed asking if the set is to bedeleted and remeasured or if it ispossibly an incomplete set andshould be completed.Sets to measureEnter in this line the amount ofsets to be measured automatically.Stop:Sys.mes & Out of tol.Automatic measurement isstopped when the tolerance set inthe configuration menu isexceeded or a system messageappears (e.g. from the slopesensor or ATR).System messages onlyMeasurement is only stopped by asystem message (e.g. from theslope sensor or ATR). Exceededtolerances are not reported. displays the automaticmeasurement.AUTO MEAS 1/2#Set : 0/ 1#Pt : 4/ 8WAITINGPtID : 103Hz : 250.0000 gV: 333.3333 g: ----.--- m 91