Leica TPS700 Series Field Manual - Surveying Equipment

118Sets the screen the instrumentstarts in when switched on.E.g. the electronic bubble can bedisplayed at every start.START-UP SEQUENCEStart-Up.: OnUse to definea new Start-Up-sequence Ends the dialogue. Changedparameters are not stored.Stores current settings.Defines the key presses that areexecuted automatically upon startup.Procedure:After confirming the dialogue ofnotification, the "Meas & Rec"screen is displayed.A maximum of 16 of the next keypresses are stored. Thesequence is ended with "ShiftESC ". If the start sequence isactivated, the stored key pressesare executed automatically whenthe instrument is switched on.The automatic startsequence has the sameeffect as pressing the keysmanually. Certain instrumentsettings cannot be made in thisway. "Relative entries" such asautomatically setting "IR-FINE"upon switching on the instrument,is not possible.