Leica TPS700 Series Field Manual - Surveying Equipment

Orientation results:PtID(1) = Point ID of thefirst target pointBrg= Calculated azimuthbetween the stationco-ordinates and thefirst target point(based on the telescopeface in whichorientation wasperformed)NoPts = Number of targetpoints usedHzCor = Hz circle correctionStDevFace= Standard deviation ofthe Hz circlecorrection= Telescope face inwhich orientation wasperformed.Reference Line Application• Reference lineMeasurement (1):PtID = Point IDHzV= Horizontal angle= Vertical angle= Measured slopedistancehr = Reflector heightTarget Point (1):PtID = Point IDE = EastingN = NorthingH = HeightMeasurement (2):PtID = Point IDHz = Horizontal angleV = Vertical angle= Measured slopedistancehr= Reflector heightTarget Point (2):PtID = Point IDE = EastingN = NorthingH = HeightTransformation Parameters:Line = Longitudinal offsetOffs = Parallel offsetHoff = Height offsetRot = Rotation• Reference Line Measurement:PtID = Point IDHz = Horizontal angleV = Vertical angle= Slope distancehr = Reflector height163