Leica TPS700 Series Field Manual - Surveying Equipment

Station SetupMeasurements54Set the occupied station nameand instrument.Procedure:1. Enter the station name (Stn)2. Enter the instrumentheight (hi):FREE STATION(Station setup)Stn : PEG1InHt : 1.567 mProceeds to the measurementscreen.Back to start-up programFree Station methods:• 2 point resection=> always use the -key orthe Button • 3 point resection with anglesonly=> Always use the RECcommandunder the FNC-menuor the -key if REC isassigned to it.• Mix of distances and angles=> Use either -key or theButton for distancesand angles or REC-commandfor angles only.Procedure:1. Enter the target point number(PtID).If the desired point is not foundwithin the internal memory, thesystem automatically opens themanual coordinate entry.2. Enter the reflector height (hr).FREE STATION 0/ 1/2PtID : ABC1TgHt : 2.300 mHz : 236°56'14": 1.350 m: 123.569 m