Leica TPS700 Series Field Manual - Surveying Equipment

92Pressing twicecompletely stops automaticmeasurement. On acknowlegingthe message the display movesback to "AUTO MEASURESETS".IRPressing onceinterrupts automatic measurement,but supplementary manualmeasurements can still be doneby pressing .Starts automatic measurement orcompletes an interrupted one.The current status is displayed inthe first line:RUNNINGCurrent measurement is runningWAITSAutomatic measurement isinterrupted. Manual measurementscan be made or pressing resumes automaticmeasurement.Set and point:The first number shows howmany sets resp. targets in thecurrent sets have already beenmeasured. The second numbershows the total number of setsresp. target per set. Each point ismeasured twice (face I and II).Therefore, a total of sixmeasurements are required forthree points.After all automatic measurementshave been made thedisplay returns to "AUTOMEASURE SETS". If in the meantime automatic measurement wasinterrupted by pressing and measurements were donemanually, has to bepressed again to move back tothe display "AUTO MEASURESETS".