Leica TPS700 Series Field Manual - Surveying Equipment

Possible Messages when Determining Instrument ErrorsMessages Meaning Measures takenV-angle cannot be used forcalculations ( check angle orface)The tolerance of aiming was notkept or telescope face was notchanged.The target point must be approx.horizontal (± 4°30).Message must be confirmed.Beyond adjustment tolerances,old values are retained.Calculated values outside oftolerance. Old values are retained.Repeat measurements.Message must be confirmed.Hz-angle outside of tolerance.Repeat measurement error!Hz-angle in second face deviatesmore than 4°30 'from target point.Measurement error occured (e.g.instable setup or time intervalbetween telescope face I and II istoo long).Aim at the target with an accuracyof at least 4°30'.Message must be confirmed.Repeat the process.Message must be confirmed.153