Banner Student / Release Guide / 7.3.2

Section 4 Problem ResolutionsLocation Management ModuleLocation Management ModuleDocumentationSLAEVNTSLARDEF(#1-16K3I4)Description: The System field was missing information about the value M,specifically that the value for MICRO-FAIDS could not be used with events.Impact: The field text did not match the autohint and was not complete.Resolution: The field text has been updated. The description now reads:“Banner system associated with the event. The system determines what forms andtables (for example, identification and address forms) are accessed from the otherforms for the event. Choices come from the System Indicator Validation (GTVSYSI)list.”System codes G, M, and T cannot be used.• The General System (code G) supports other Banner systems and cannot bedirectly associated with an event.• The MICRO-FAIDS Interface (code M) cannot be associated directly with anevent.• Accounts Receivable (code T) is part of the Student System and the FinanceSystem.(#1-1KXMER)Description: The Priority field definition read that rooms were scheduled bySLRSCHD in descending order starting with 99999999. The Batch Scheduling ofHousing Assignments procedure information read that the lower the number, thehigher the priority, and rooms with a priority of 1 were scheduled first. The fielddefinition was incorrect. The lowest number is the highest priority and is consideredfirst if scheduling is performed by priority.Impact: The field definition did not explain the priority correctly.Resolution: The field definition has been corrected to read:"Number that indicates the order in which the Batch Scheduler Report (SLRSHCD)schedules the room. Rooms are scheduled in ascending order, starting with99999999. The default value is 9999999. It can be changed.”February 2007 Student Release 7.3.2Confidential Release Guide 79