LTQ Orbitrap XL Hardware Manual

Parts Gas and Water Supply
Replaceable Parts
Parts Basic System
This topic contains parts lists for the gas and water supply of the
LTQ Orbitrap XL. For a schematical overview of the gas supply, refer to
Figure 1-19 on page 1-25.
Table 4-10. Parts gas supply (P/N 117 7881)
Pos. No. Qty. Designation Part No.
0010 2 Bulkhead union; 1/16”, for hose 4 x 1 (for
P/N 069 1130)
115 3660
0020 1 Bulkhead union; 1/8"×1/8" 052 3450
0030 4.5 m * Hose; 4 x 1, Teflon 069 0280
0040 3.5 m * Hose; 4 x 1, polyurethane, blue 069 1130
0050 0.5 m * Capillary 1/16" ID-SS 060 5470
0060 2 Plug-in T-piece; 3 x 6mm 112 8140
0070 1 Stainless steel reducing union; Swagelok,
6 mm-1/16”
* Specify required length.
117 8070
0080 1 T-piece; 1/16" (SS-100-3) 052 3550
0090 1 Coupling; 1/16”, SS-100-6 052 4340
0100 3 PEEKSIL capillary; 1/16", 500 × 0.075 mm 118 6970
0110 1 Reducer Swagelok; 1/8" × 1/16", stainless steel 066 2880
0120 2 Support jack; for hose 4 mm 104 9620
0130 6 Ferrule; 1/16" GVF/16 067 4800
0140 1 N 2 venting Orbitrap 119 1480
0150 1 Connector 1/8”, for hose OD 4 mm 112 8680
0160 1 Cap nut; 1/16”, stainless steel 052 0880
0170 3.0 m *
Hose; 2 x 1, PTFE 109 1650
0180 1 Sleeve; Ø 6 mm 104 7320
Table 4-11. Upgrade kit gas supply LTQ Orbitrap XL (P/N 122 4820)
Pos. No. Qty. Designation Part No.
0050 0.10 m *
Capillary 1/16" ID-SS 060 5470
0070 1 Stainless steel reducing union; Swagelok,
6 mm-1/16”
117 8070
0080 1 T-piece; 1/16" (SS-100-3) 052 3550
0090 1 Coupling; 1/16”, SS-100-6 052 4340
0100 2 PEEKSIL capillary; 1/16", 500 × 0.075 mm 118 6970
0130 6 Ferrule; 1/16" GVF/16 067 4800
0190 2 Capillary; PEEKsil, 1/16", 0.1 × 500 mm 122 3420
Thermo Fisher Scientific LTQ Orbitrap XL Hardware Manual 4-5