LTQ Orbitrap XL Hardware Manual

More documents

Recommendations

Info

Functional Description Orbitrap Analyzer HCD Collision Cell The collision cell consists of a straight multipole mounted inside a metal tube which is connected in direct line-of-sight to the C-Trap. Figure 1-14 shows a close-up view of the configuration. HCD collision cell Figure 1-14. HCD collision cell and C-Trap 1-18 LTQ Orbitrap XL Hardware Manual Thermo Fisher Scientific C-Trap It is supplied with a collision gas through the open split interface, providing increased gas pressure inside the multipole. The choice of collision gas is independent from the gas in the C-Trap. See topic “Gas Supply” on page 1-25 for details. The front of the tube is equipped with a lens for tuning transmission and ejection to/from the C-Trap. The ion optic supply board provides the voltages for the collision cell. (See page 1-46.) For HCD (Higher Energy Collisional Dissociation), ions are passed through the C-Trap into the collision cell. The offset between the C-Trap and HCD is used to accelerate the parents into the gas-filled collision cell.
Vacuum System Pirani Gauge Fore Pump Turbopump TMH 071 (TMP 2) Fore Pump LTQ XL Functional Description Vacuum System Figure 1-15 shows a schematic overview of the vacuum system. The Orbitrap has the following vacuum compartments: • CLT compartment in the aluminum vacuum chamber (pumped by the same pump as the linear trap) • Vacuum chamber (pumped by a water-cooled 60 L/s – for N 2 – turbopump TMH 071, TMP 1, manufacturer: Pfeiffer) • Ultra high vacuum chamber (UHV chamber, pumped by a water-cooled 60 L/s turbopump TMH 071, TMP 2, manufacturer: Pfeiffer) • Orbitrap chamber (pumped by a 210 L/s – for N 2 – water-cooled turbopump TMU 262, TMP 3, manufacturer: Pfeiffer) The forepumps of the linear trap provide the forevacuum for the turbopumps. Figure 1-15. Schematical view of vacuum system (CLT compartment not shown) * * For an abridged version of the parts list, see Table 4-7 on page 4-3. Cold Ion Gauge UHV Chamber Orbitrap Chamber Turbopump TMU 262 (TMP 3) Vacuum Chamber Turbopump TMH 071 (TMP 1) LTQ XL Thermo Fisher Scientific LTQ Orbitrap XL Hardware Manual 1-19
Page 1 and 2: For Research Use Only Not for use i
Page 3: Place Declaration of Conformity her
Page 6 and 7: Conformité DEEE Ce produit doit ê
Page 8 and 9: Read This First Related Documentati
Page 10 and 11: Read This First Typographical Conve
Page 12 and 13: Read This First Safety and EMC Info
Page 14 and 15: Read This First Safety and EMC Info
Page 17 and 18: Contents Chapter 1 Functional Descr
Page 19 and 20: Figures LTQ Orbitrap XL front view
Page 21: Tables System status LEDs of the Pr
Page 24 and 25: Functional Description General Desc
Page 26 and 27: Functional Description General Desc
Page 28 and 29: Functional Description Control Elem
Page 34 and 35: Functional Description Linear Ion T
Page 36 and 37: Functional Description Orbitrap Ana
Page 38 and 39: Functional Description Orbitrap Ana
Page 42 and 43: Functional Description Vacuum Syste
Page 48 and 49: Functional Description Gas Supply I
Page 50 and 51: Functional Description Cooling Wate
Page 52 and 53: Functional Description Printed Circ
Page 79 and 80: Chapter 2 Basic System Operations M
Page 81 and 82: Basic System Operations Shutting Do
Page 83 and 84: Shutting Down the System Basic Syst
Page 85 and 86: Starting Up the System after a Shut
Page 87 and 88: Basic System Operations Starting Up
Page 89: Basic System Operations Resetting t
Page 92 and 93:
User Maintenance General Remarks Ge
Page 94 and 95:
User Maintenance Baking Out the Sys
Page 96 and 97:
User Maintenance Maintaining the Va
Page 99 and 100:
Chapter 4 Replaceable Parts This ch
Page 101 and 102:
Parts Orbitrap Analyzer Parts Pumpi
Page 103 and 104:
Parts Gas and Water Supply Replacea
Page 105 and 106:
Electronic Parts Electronics - Righ
Page 107:
Electronics Main Supply Table 4-18.
Page 110 and 111:
Glossary: collision-induced dissoci
Page 112 and 113:
Glossary: IEEE IEEE Institute of El
Page 114 and 115:
Glossary: P/N P/N part number p-p p
Page 116 and 117:
Glossary: V dc V dc volts direct cu
Page 118 and 119:
Index: D control unit, for turbopum
Page 120 and 121:
Index: O O pressure 1-26 pressure r
Page 122:
Index: W quality 1-40 safety thresh
show all

LTQ Orbitrap XL Hardware Manual

Create successful ePaper yourself

Delete template?

Save as template?