LTQ Orbitrap XL Hardware Manual
LTQ Orbitrap XL Hardware Manual
LTQ Orbitrap XL Hardware Manual
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Functional Description<br />
Printed Circuit Boards<br />
Electronic Boards at the Right Side of the Instrument<br />
Figure 1-24 shows the parts of the instrument when the right side panel<br />
is opened. A transparent cover protects the lower part.<br />
Preamplifier<br />
Instrument Control<br />
board housing<br />
Power Supply 1<br />
board<br />
Ground wire for<br />
side panel<br />
Figure 1-24. Electronic boards on the right side of the instrument<br />
Computer<br />
housing<br />
Power<br />
Distribution<br />
board<br />
Ground<br />
wire for<br />
side<br />
panel<br />
The side panel is connected to the instrument frame by two<br />
green/yellow ground wires. See bottom of Figure 1-24. The connectors<br />
on the panel are labeled with green-yellow PE (for Protective Earth)<br />
signs. See photo left. Do not forget to reconnect them before closing the<br />
panel!<br />
1-32 <strong>LTQ</strong> <strong>Orbitrap</strong> <strong>XL</strong> <strong>Hardware</strong> <strong>Manual</strong> Thermo Fisher Scientific
Change language