LTQ Orbitrap XL Hardware Manual

Safety Advice for Possible Contamination
Read This First
Safety and EMC Information
Hazardous Material Might Contaminate Certain Parts of Your
System During Analysis.
In order to protect our employees, we ask you to adhere to special
precautions when returning parts for exchange or repair.
If hazardous materials have contaminated mass spectrometer parts,
Thermo Fisher Scientific can only accept these parts for repair if they
have been properly decontaminated. Materials, which due to their
structure and the applied concentration might be toxic or which in
publications are reported to be toxic, are regarded as hazardous.
Materials that will generate synergetic hazardous effects in combination
with other present materials are also considered hazardous.
Your signature on the Repair-Covering letter confirms that the
returned parts have been decontaminated and are free of hazardous
materials.
The Repair-Covering letter can be ordered from your service engineer or
downloaded from the Customer Information Service (CIS) site. Please
register under http://register.thermo-bremen.com/form/cis.
Parts contaminated by radioisotopes are not subject to return to Thermo
Fisher Scientific – either under warranty or the exchange part program.
If parts of the system may be possibly contaminated by hazardous
material, please make sure the Field engineer is informed before the
engineer starts working on the system.
Thermo Fisher Scientific LTQ Orbitrap XL Hardware Manual ix