LTQ Orbitrap XL Hardware Manual
LTQ Orbitrap XL Hardware Manual
LTQ Orbitrap XL Hardware Manual
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Basic System Operations<br />
Shutting Down the System<br />
secure the main switch with a padlock or tie-wrap to prevent<br />
unintended re-powering.<br />
Warning Allow heated components to cool before you service them<br />
(the ion transfer tube at about 300 °C, for example). ▲<br />
Note If you are planning to perform routine or preventive system<br />
maintenance on the <strong>LTQ</strong> <strong>Orbitrap</strong> <strong>XL</strong> only, you do not need to turn off<br />
the recirculating chiller, LC, autosampler, or data system. In this case,<br />
the shutdown procedure is completed. However, if you do not plan to<br />
operate your system for an extended period of time, you might want to<br />
turn off the recirculating chiller, LC, autosampler, and data system. ▲<br />
2-6 <strong>LTQ</strong> <strong>Orbitrap</strong> <strong>XL</strong> <strong>Hardware</strong> <strong>Manual</strong> Thermo Fisher Scientific
Change language