CDK-111A-Lite Owner's Guide - Ross Video

More documents

Recommendations

Info

Technical SpecificationsGeneralThe following is a list of general specifications pertaining to the CDK-111A-Lite:• Built-in video test pattern generator (Flat-field black, PLLPathological, EQ Pathological, Color bars 75%)• Key Invert• Rounding to 8-bit or 10-bit• Dithering to 0, +/-3, +/-7 or +/-15 levels• Fully digital 14-bit internal processing• Clip to SMPTE Luminance range or allow Super-Black and/orSuper-White levels (configured via menu)• Card-edge menu system control• Card-edge Key Trans button, Background Trans button and FadeTo Black button• RS-485 Remote control (GVG 100 Protocol)• GPI and Tally BNCs (configured via menu)• DCP-111 Control Panel (optional)• SMPTE 269M Fault ReportingSystem Timing• All video inputs zero time relative to BKGD 1 input, auto timingwill correct for inputs out of time by up to one full frame.• The minimum delay through the keyer is 114 samples. This delaycan be manually increased in single sample steps to a maximum ofone full frame.• Delays are adjustable between the start of the reference signalframe and the start of the video output frame.6-2 • Appendix C. Specifications CDK-111A-Lite • Owner’s Guide v4B
Feature Comparison ChartFeature CDK-111A-Lite CDK-111A-MVideo input channels 3 4Number of keys on air 1 2Preview Overlay menu display No YesBKGD crossfade No YesFrame synchronization on every input Yes YesExternal analog reference signal input Yes YesAdjustable delay from reference to output signal Yes YesStorage for multiple stills and animated logos No 32MBFade to black Yes YesProgram output with EDH insertion Yes YesSecond program output with EDH insertion Yes Yes (1)One preview output with EDH insertion No Yes (1)Fail-safe relay BKGD1 to PGM Out 1 on power failure Yes YesAccommodates SMPTE 259M-C Yes YesUSB port for image download No YesFull transition control with 0-999 frame control Yes YesClip, gain, matte fill, and box mask controls Yes YesControl via GPI, unbalanced full duplex RS-485 or 0-12V RS-232 compatible interface, on-screenconfiguration menu, control panel, and card-edgepushbuttonsSupports 525-line (NTSC) and 625-line (PAL) formats Yes YesSerial interface Yes Yes5 year warranty Yes YesYes1) Configured via the menu, if desiredYesAnalog Reference Input• Accept a black analog reference from the DFR-8110A-C frame.• NTSC or PAL automatic detection.• On-board Phase Lock Loop maintains a stable display if the analogreference is lost.CDK-111A-Lite • Owner’s Guide v4B Appendix C. Specifications • 6-3
Page 1 and 2:
Ross Video LimitedCDK-111A-LiteOwne
Page 4 and 5:
Important Regulatory and Safety Not
Page 6 and 7:
Company AddressRoss Video Limited R
Page 9 and 10:
ContentsIntroduction 1-1A Word of T
Page 11 and 12:
Technical Specifications...........
Page 13 and 14:
IntroductionA Word of ThanksCongrat
Page 15 and 16:
Documentation ConventionsThe follow
Page 17 and 18:
AbbreviationsThe following abbrevia
Page 19 and 20:
Product Comparison ChartFor your re
Page 21 and 22:
A Word about Technical SupportAt Ro
Page 23 and 24:
Installation and SetupIn This Chapt
Page 25 and 26:
OverviewCDK 11111023456798CDK111A-L
Page 27 and 28:
BNC ConnectorsThis section defines
Page 29 and 30:
Single CDK-111A-Lite Settings for R
Page 31 and 32:
Accessing the Menu SystemSetup and
Page 33 and 34:
Control Panel - DCP-111 (Optional)U
Page 35 and 36:
Navigating Through the Menus Using
Page 37 and 38:
The next series allow you to config
Page 39 and 40:
8012345 67Card Address Configuratio
Page 41 and 42:
OperationIn This ChapterThis chapte
Page 43 and 44:
4) Menu Select/FTB Button (SW4)•
Page 45 and 46:
Control Panel - DCP-111 (Optional)T
Page 47 and 48:
GPIs and TalliesThis section descri
Page 49 and 50:
The Menu SystemThe CDK-111A-Lite is
Page 51 and 52:
Menu 1: Runtime ParametersAuto Tran
Page 53 and 54: Menu 4: Box Mask PositioningMenu 4:
Page 55 and 56: Menu A: DiagnosticsMenu A: Diagnost
Page 57 and 58: Menu D: Card SetupTest PatternSelec
Page 59 and 60: Menu F: BNC ListingMenu F: BNC List
Page 61 and 62: Appendix A. Serial ProtocolsIn This
Page 63 and 64: By means of “read” and “write
Page 65 and 66: The components of the serial data a
Page 67 and 68: Receive commandfrom editorMake chan
Page 69 and 70: Message BytesThe number of message
Page 71 and 72: Protocol Command DescriptionsList o
Page 73 and 74: Bit776655Analog Control Command (45
Page 75 and 76: NotePush-button / Lamp Control Comm
Page 77 and 78: Transition Mode Command (4A, CA)Fun
Page 79 and 80: Rate2=Next most significant digitRa
Page 81 and 82: Software Version Command (6C, EC)Th
Page 83 and 84: Error Status Command (71, 72)The ed
Page 85 and 86: GVG MASTER2100 Emulation ProtocolTh
Page 87 and 88: Command ListThe following table lis
Page 89 and 90: Select Transition Type (0x03, TX_TY
Page 91 and 92: FunctionCrosspoint byte values:00 N
Page 93 and 94: Key Enable (0x0B, KEY_ENABLE)Functi
Page 95 and 96: FunctionQUERYErrorCodeFunctionQUERY
Page 97 and 98: either end of the communications li
Page 99 and 100: Appendix B. Software UpgradesIn Thi
Page 101 and 102: CautionCard may be hot to the touch
Page 103: Appendix C. SpecificationsIn This A
Page 107 and 108: CDK-111A-Lite BNC SettingsConnector
Page 109 and 110: I/O, Power, Delay SpecificationsTec
Page 111 and 112: BNC 4 (Tx) RS422/RS485 Jumper Confi
Page 113 and 114: Index112-Bit Analog Value..........
Page 115 and 116: GPIabbreviation ...................
Page 117 and 118: SW5, Board ID Switch ..............
show all

CDK-111A-Lite Owner's Guide - Ross Video

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?