CDK-111A-Lite Owner's Guide - Ross Video

Menu A: DiagnosticsMenu A: DiagnosticsThe Error LED on the card edge will turn on in the following circumstances:• An error in an incoming video source has been detected and you have programmed the card to reportthose errors to you. The error LED on the card will stay on until the video error has been corrected.You have the option in this menu of turning off the reporting of these video errors on an input-by-input basis. If youare not going to be attaching video to any input, you should turn error reporting off for it, as this would cause theerror LED to be on constantly, negating its usefulness.• An internal error of some kind has occurred. These errors can be anything from a communication errorto a failure of some internal diagnostics.This menu will display the last 50 internal errors that have occurred and how long it has been since that erroroccurred.When a new internal error occurs, the Error LED will turn on. Once this error has been viewed in this diagnosticsmenu, the Error LED will turn off.BKGD 1 Video The choices are:• LED ON IF ERROR – The error LED will turn on whenever there is a video erroron BKGD 1 Video.• LED OFF IF ERROR – Video errors on BKGD 1 will be reported in the menu, butLED will not light.Key VideoThe choices are:• LED ON IF ERROR – The error LED will turn on whenever there is a video erroron Key Video.• LED OFF IF ERROR – Video errors on Key Video will be reported in the menu,but LED will not light.Alpha VideoThe choices are:• LED ON IF ERROR – The error LED will turn on whenever there is a video erroron Alpha Video.• LED OFF IF ERROR – Video errors on Alpha Video will be reported in the menu,but LED will not light.At the bottom of the menu area, the error message type and the time since the error occurred are displayed.The messages can be scrolled using the up/down buttons. These items cannot be changed and are for reportingpurposes only.There are two types of errors that will appear here – Operational and Internal errors.Operational errors are not necessarily a problem; the occasional checksum failure on communication protocols forexample, is quite ordinary. However, the same error repeatedly should be investigated.Internal errors will be marked by the text “Internal Error #: xxx”, where xxx is replaced by a number. These errorsshould never appear. If you encounter them, please call Ross Video Customer Service and report them.Menu B: Reserved For Future UseMenu B: Reserved For Future UseCDK-111A-Lite • Owner’s Guide v4B Operation • 3-15