CDK-111A-Lite Owner's Guide - Ross Video

Command ListThe following table lists the supported MASTER2100 protocol commands:Command ListFunction Mnemonic ID Value Command Query StatusNext Transition TX_NEXT 0x01 Yes Yes YesStart Transition TX_START 0x02 Yes No YesSelect Transition Type TX_TYPE 0x03 Yes Yes YesSelect Transition Rate TX_RATE 0x04 Yes Yes YesTransition Status TX_STAT 0x05 No Yes YesTake Crosspoint XPT_TAKE 0x06 Yes Yes YesBreak Away BREAK_AWAY 0x07 Yes Yes YesKey Modifier KEY_MOD 0x0A Yes Yes YesKey Enable KEY_ENABLE 0x0B Yes Yes YesKey Status KEY_STAT 0x0C No Yes YesAutomation Enable Status AUTO_STAT 0x0D No Yes YesStop Ongoing transition ALL_STOP 0x0E Yes No YesSystem Status SYSTEM_STAT 0x12 No Yes YesSystem Configuration SYSTEM_CONFIG 0x13 No Yes YesTransition Status TX_STAT2 0x15 No Yes YesError Status for Previous ERROR_STAT 0x20 No Yes YesProtocol / Version PROTO_VER 0x21 No Yes YesFunction: a description of the command’s function on the CDK-111A-Lite.Mnemonic: the (case-sensitive) command syntax.ID Value: a Hex identifier number unique to each command.Command: indicates whether the command can be in the form of a command (in theclass indicator field) to the CDK-111A-Lite or not.Query: ‘indicates whether the command can be in the form of a query (in the classindicator field) to the CDK-111A-Lite or not.Status: indicates whether the command can be in the form of a status response (inthe class indicator field) from the CDK-111A-LiteThe command-specific data fields for the supported GVG MASTER2100 protocolcommands are defined in the following section.CDK-111A-Lite • Owner’s Guide v4B Appendix A. Serial Protocols • 4-27