CDK-111A-Lite Owner's Guide - Ross Video

The next series allow you to configure your CDK-111A-Lite to meet youroperational requirements.• Keyer TypeStandalone Keyer.• ProtocolThere are three choices – None, Master 2100, and GVG 100.• Menu OutputThe Menu Output will display on the Program monitor.• Test Pattern SelectionSelect one of the built-in test patterns – Color bars 75%, EQPathological, PLL Pathological, Flat Field Black.• Display Test PatternPressing the Menu Select Button will display the test pattern that ispresently selected.The final items in Menu D allow you to define how you want your CDK-111A-Liteto operate and communicate with the rest of your facility. There are severalvariations to consider:• BNC 2BNC 2 can be configured in one of three ways – either as an input for aGPI, as the Control Panel connection point, or as a Tally output. Toconfigure BNC 2 as a,o GPI Input~ Bridge jumper J6 (see card diagram at the beginning of thischapter for the location of J6) at pins 1 and 2. See AppendixC, “Specifications” for jumper pinout reference.~ Set BNC 2 value in the menu to GPI #1.o Control Panel Connection Point~ Bridge jumper J6 (see card diagram at the beginning of thischapter for the location of J6) on the card at pins 3 and 4.~ Set BNC 2 value in the menu to DCP.o Tally Output~ Bridge jumper J6 (see card diagram at the beginning of thischapter for the location of J6) on the card at pins 5 and 6.~ Set BNC 2 value in the menu to Tally #1.CDK-111A-Lite • Owner’s Guide v4B Installation and Setup • 2-15