ABB i-busÂ® EIB Switch/dim actuator, FM Type: 6114 U-500

More documents

Recommendations

Info

ABB i-bus ® EIBSwitch/dim actuator, FMType: 6114 U-500 + 6116-2xParameters for the push buttonThe default setting for the valuesis printed in bold type.Separate for each push button:– Operation mode rocker SwitchingDimmingShutterFlexible allocationOnly if “Flexible allocation” is selected:– Reaction on upper contact TOGGLEswitch definedOnly if “switch defined” is selected:– Value of object A no reactionrising = ONrising = OFFfalling = ONfalling = OFFrising = ON, falling = OFFrising = ON, falling = ONrising = OFF, falling = ONrising = OFF, falling = OFF– Reaction on lower contact TOGGLEswitch definedOnly if “switch defined” is selected:– Value of object B no reactionrising = ONrising = OFFfalling = ONfalling = OFFrising = ON, falling = OFFrising = ON, falling = ONrising = OFF, falling = ONrising = OFF, falling = OFF– Operation mode of LED shows object valueorientation lightOnly if “shows object value” is selected:– Colour of the LED OFF = green, ON = redOFF = red, ON = greenOnly if “orientation light” is selected:– Colour of the LED always greenalways redMarch 2003 8 - 89
ABB i-bus ® EIBSwitch/dim actuator, FMType: 6114 U-500 + 6117-2xSwitch Dim Shutter Flex. Alloc. LogicStatus /1Selection in ETS2– ABBPush Button alpha neaPush button, 4-fold for 1SDAThe application program is intendedfor the 4-fold switch sensor applicationmodule in connection with the switch/dim actuator FM.Note: The descriptions for– switch,– dim,– status,– logic,– read-only memory,– bus voltage failure or recoveryhave already been outlined in theapplication description “Switch DimLogic Status Fixed value /1”.The functions of the push buttons aredescribed in the following section.SwitchIf the parameter “Operation moderocker” is set to “Switching”, the ETS2program displays the communicationobjects “Push button ... - Switching”.When the upper contact of the pushbutton is pressed, the device sends an“On” telegram while an “Off” telegramis sent on the EIB when the lowercontact is pressed.DimIn the “Dimming” operating mode,ETS2 displays two communicationobjects for each push button fordimming.After a short push button action, thecorresponding 1 bit communicationobject “Push button ... short -Switching” sends “On” or “Off”telegrams on the EIB.After a long operation, the push buttonsends dimming telegrams to the 4 bitobject “Push button ... long - Dimming”.When the push button is released, thepush button sends the telegram “Stopdimming”.Pressing the upper contact switcheson or dims brighter. Pressing the lowercontact switches off or dims darker.ShutterIf “Shutter” is selected as the operatingmode, two 1 bit communication objectsare available for each push button.After a long push button action, thecorresponding object “Push button ...long - Move shutter” sends telegramsfor shutter movement. The object “Pushbutton ... short - Adjust lamella ofshutter” sends “Louvre adjustment /stop” telegrams after a short pushbutton action.Pressing the upper push buttonenables the shutter to be raised i.e. thevalue “0” is sent. After pressing thelower contact, a “1” is sent and theshutter is lowered.Flexible allocationIn the operation mode “Flexibleallocation”, each push button has two1 bit communication objects available.With the parameters “Reaction onupper contact” or “Reaction on lowercontact”, it is defined when the pushbutton sends “On” or “Off” telegrams.By default, the push button is toggledafter each operation. With the setting“switch defined”, it can be freelyselected whether a telegram is sentwhen the push button is pressed(rising) or when it is released (falling).With the setting “no reaction”, the pushbutton is switched off.LEDWith the parameter “Operation mode ofLED”, it can be defined whether theLED displays the value of object no. 8/10/12/14 “Push button ...” or alwayslights up in the same colour as anorientation light.8 - 90 March 2003
Page 1 and 2: ABB i-bus ® EIBSwitch/dim actuator
Page 13: ABB i-bus ® EIBSwitch/dim actuator
Page 65 and 66:
ABB i-bus ® EIBSwitch/dim actuator
Page 67 and 68:
Page 69 and 70:
Page 71 and 72:
Page 73 and 74:
Page 75 and 76:
Page 77 and 78:
show all

ABB i-busÂ® EIB Switch/dim actuator, FM Type: 6114 U-500

Create successful ePaper yourself

Delete template?

Save as template?