ABB i-busÂ® EIB Switch/dim actuator, FM Type: 6114 U-500

More documents

Recommendations

Info

ABB i-bus ® EIBSwitch/dim actuator, FMType: 6114 U-500 + 6322-xx-101Using the parameters “Time base ...”and “Factor for dimming range”, it ispossible to set the period which thedimming actuator requires to dim up ordown fully once.IRIn addition to using the rockers, theBusch-triton ® switch sensor can alsobe controlled remotely via an infraredhand-held transmitter. The rockers andthe auxiliary push button can beassigned to the white or blue infraredarea of the hand-held transmitter. Therelevant setting must then be selectedvia the slide switch on the transmitter.The MEMO button of the transmittercorresponds to the function of theauxiliary push button of the Buschtriton® switch sensor.SwitchIn the default setting of the Buschtriton® switch sensor, there is a 1 bitcommunication object available forswitching for each of the rockers thatare not assigned lightscenes. Forspecial applications, the parameter“Number of switch functions” can beset so that each rocker has twocommunication objects.ShutterIf the operating mode of the rocker isset to “Shutter sensor”, the switchsensor sends “Move shutter up/down”telegrams when the left or right side ofthe rocker is pressed for a long period.After a short operation anywhere onthe rocker, it sends telegrams forstopping the shutter movement or forstepwise louvre adjustment.The parameter “Shutter direction”determines which side of the rockermust be pressed in order to moveupwards or downwards.LEDUsing the parameter “Operation modeof LED”, the LEDs can be selected foruse either as an orientation light or forstatus display.In the case of LEDs that are used forstatus display, it is possible to setwhich colour (red or green) isassigned to the object values “0” or “1”.The LEDs that are used as anorientation light can either always lightup red or always green or they can beswitched off.The parameter “Working mode of therocker” determines which value theswitch sensor sends when the left orthe right side of the rocker is pressed.DimIf the operation mode of the rocker isset to “Dimming sensor”, the rockerhas the communication objects“Rocker ... -short” for switching and“Rocker ... -long” for dimming.When carrying out a switchingoperation, the rocker can either bepressed briefly on the left, on the rightor in the middle. The switch sensoralways toggles in this case.For dimming, it is determined via theparameter “Dimming direction” whichside of the rocker must be pressed andheld down in order to dim up or down.When the rocker is released, theswitch sensor sends the telegram“Stop dimming”.March 2003 8 - 107
ABB i-bus ® EIBSwitch/dim actuator, FMType: 6114 U-500 + 6322-xx-101LightscenesIn lightscene mode, up to six sceneswith up to six different groups ofactuators can be controlled withoutspecial lightscene modules.The lightscenes can be specified viathe device parameters. The user canthen reconfigure the parametersindividually according to hisrequirements while the installation is inoperation. The auxiliary push button isused for storing new lightscenes(parameters). To do this, the parameter“Function of auxiliary push button”must be set to “Save lightscenes”. Tobe able to use this function, thetransmitting group addresses and flagsmust be assigned correctly whenconfiguring the actuators.The lightscenes are configuredaccording to the following process.1. The number of lightscenes and theirrespective rocker assignment can beset on the “General” parameterpage.2. For each of the actuator groupsA ... F, it must be determined with theparameter “Type of actuator group...”, whether they use 1 bitcommunication objects (switch orshutter actuators) or 8 bitcommunication objects (dimmingactuators). Depending on thissetting, the ETS2 program displaysvarious parameters andcommunication objects.Communication objects 13 ... 18 areused for the control of actuatorgroups A ... F.3. For each of the lightscenes, valuescan be preset for the actuator groupson their own parameter page.4. The rockers that are not used forlightscenes are still available forswitching, dimming or shutter control.The parameter value “no function”must be selected for unassignedrockers.Application example:Dimmable ceiling lamps are installedin a hotel room. There is also adimmable reading light by the bed. Thelight in the adjoining bathroom canalso be dimmed.From the door, it should be possible tocontrol the dimmable ceiling lamps inthe lounge/sleeping area and thebathroom light separately. Twolightscenes should be recalled via onepush button action:1. Switch all the lights to maximumbrightness for cleaning the room.2. Switch off all the lights when leavingthe room.From the bed, it should be possible tocontrol the dimmable ceiling lampsand the reading light separately. Twolightscenes should be recalled via onepush button action:1. Dim the ceiling lamps to semibrightnessto light the way during thenight and switch on the bathroomlight.2. Switch off all the lights for sleeping.Two 3-fold Busch-triton ® switchsensors, each with a dimming actuator/sensor FM and a switch/dim actuatorare used. The output of the dimmingactuator/sensor at the door controls thebathroom light. The output of thedimming actuator/sensor at the bedcontrols the reading light.If a rocker is used for recallinglightscenes, the LED indicates whichside of the rocker has been pressed. Itglows red when the left side is pressedand glows green when the right side ispressed. If several rockers are used,the LED of the rocker which was lastpressed lights up.8 - 108 March 2003
Page 1 and 2: ABB i-bus ® EIBSwitch/dim actuator
Page 31: ABB i-bus ® EIBSwitch/dim actuator

ABB i-busÂ® EIB Switch/dim actuator, FM Type: 6114 U-500

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?