FONTARGEN A/AF 314

More documents

Recommendations

Info

<strong>FONTARGEN</strong> AP 21 KLCopper- tin- brazing pasteDIN EN 1044: CU 202DIN 8513: L-CuSn 12EN ISO 3677: B-Cu88Sn(P) – 825/990Composition, typical analysis (% w/w):Cu Sn P88,0 12,0 0,01 – 0,4Mechanical and physical properties:Working temperature: 990°CMelting range: 825 - 990°CGap width:≤ 0,15 mmViscosity range:100.000 – 110.000 mPasMetal content: 88,0 %Tensile strength:276 N/mm 2 (Assembly gap 0,05mm)(Steel St 37-2 / Tensile test according to DIN50145) 238 N/mm 2 (Assembly gap 0,15mm)Characteristics / Applications:Flux-free copper- tin- brazing paste with high metal content. The paste has a high viscosityand dries slowly on air. Due to the low melting range the paste is particularly well suitedfor brazing of unalloyed and alloyed steel, copper and copper-plated workpieces aswell as copper- nickel- alloys. Interesting for workpieces that have to be processed at lowtemperatures.Application:Manually or automatically with pneumatical or mechanical dispensing units. Moreinformation in the dosing technology brochure from Fontargen.Heat sources:Inert-gas continuousfurnaceExogasInert-gas continuousfurnaceH 2 /N 2Vacuum furnaceAvailability:PastePowder08/08/He/0105
<strong>FONTARGEN</strong> AP 22 GSCopper- tin- brazing pasteEN ISO 3677: B-Cu96– 960/900Composition, typical analysis (% w/w):CuSn96,0 4,0Mechanical and physical properties:Working temperature: 1060- 1100°CMelting range: 960- 1060°CGap width:0,05 - 0,2 mmViscosity range:45.000- 55.000 mPasMetal content: 84,0 %Characteristics / Applications:Flux-free copper- tin- brazing paste with high metal content. The paste has a low viscosity,is easy to dispense and dries quickly on air. Good wetting and flowing properties.Application:Manually or automatically with pneumatical or mechanical dispensing units. Moreinformation in the dosing technology brochure from Fontargen.Heat sources:Inert-gas continuousfurnaceExogasInert-gas continuousfurnaceH 2 /N 2Vacuum furnaceAvailability:PastePowder8/08/He/0106
Page 2 and 3:
FONTARGEN GmbHSiemensstraße 467304
Page 4 and 5:
ContentsSummary in groups of FONTAR
Page 7 and 8:
Brazing and soldering alloysa) Braz
Page 9 and 10:
Brazing and soldering alloysd) Sold
Page 11 and 12:
FONTARGEN A 101High strength brazin
Page 13 and 14:
FONTARGEN A 210Brass hard solderDIN
Page 15 and 16:
FONTARGEN A 210 MKBrazing rod with
Page 17 and 18:
FONTARGEN A 211 RFBrass hard solder
Page 19 and 20:
FONTARGEN A 2003Copper-phosphorus a
Page 21 and 22:
FONTARGEN A 2005Copper-phosphorus-t
Page 23 and 24:
FONTARGEN A 3002Silver containing c
Page 25 and 26:
FONTARGEN A 3005 SSilver containing
Page 27 and 28:
FONTARGEN A 3018Copper-phosphorus a
Page 29 and 30:
FONTARGEN A 331Silver brazing alloy
Page 31 and 32:
Page 33 and 34:
Page 35 and 36:
Page 37 and 38:
Page 39 and 40:
Page 41 and 42:
Page 43 and 44:
Page 45 and 46:
FONTARGEN A 308 VSilver-Copper-Eute
Page 47 and 48:
FONTARGEN A 341Palladium containing
Page 49 and 50:
FONTARGEN A 345Palladium containing
Page 51 and 52:
FONTARGEN A 407 LAluminium hard sol
Page 53 and 54:
FONTARGEN AP 211 FMFlux containing
Page 55 and 56: FONTARGEN AP 2003Copper-phosphorus
Page 58 and 59: FONTARGEN AP 3018Copper-phosphorus
Page 60 and 61: FONTARGEN AP 306 FMCadmium bearing,
Page 62 and 63: FONTARGEN AP 320 FMCadminumfree, fl
Page 64 and 65: FONTARGEN AP 314 ILSilver brazing a
Page 66 and 67: FONTARGEN AP 317 FMFlux containing
Page 68 and 69: FONTARGEN AP 350 FMCadminum free, f
Page 70 and 71: FONTARGEN AP 46 QL/3Aluminium brazi
Page 72 and 73: FONTARGEN A 604Friction solderDIN E
Page 74 and 75: FONTARGEN A/AF 605Eutectic soft sol
Page 76 and 77: FONTARGEN A/AF 612Antimony-free sof
Page 78 and 79: FONTARGEN A 630Soft solderEN ISO 94
Page 80 and 81: FONTARGEN A 644Copper-bearing, lead
Page 82 and 83: FONTARGEN AP 604/12Tinning solderin
Page 84 and 85: FONTARGEN AP 638/26 NFlux containin
Page 86 and 87: FONTARGEN AP 644/21Lead free tin co
Page 88 and 89: FONTARGEN A 200 LCopper brazing all
Page 90 and 91: FONTARGEN A 200/2 LCopper-based hig
Page 92 and 93: FONTARGEN A 203/6 LCopper-based hig
Page 94 and 95: FONTARGEN A 205Copper-based high-te
Page 96 and 97: FONTARGEN AP 20 AL DBCopper high-te
Page 98 and 99: FONTARGEN AP 21 AL CCopper high-tem
Page 100 and 101: FONTARGEN AP 21 CLPCopper high-temp
Page 102 and 103: FONTARGEN AP 21 DL / DSCopper- nick
Page 104 and 105: FONTARGEN AP 21 GL / GSCopper- tin-
Page 108 and 109: FONTARGEN AP 22 LLCopper- tin- braz
Page 110 and 111: FONTARGEN HTL 1ANickel-based high-t
Page 112 and 113: FONTARGEN HTL 2 AP (L)Nickel-based
Page 114 and 115: FONTARGEN HTL 3Nickel-based high-te
Page 116 and 117: FONTARGEN HTL 5 MNickel-based high-
Page 118 and 119: FONTARGEN HTL 6 AP BNickel-based hi
Page 120 and 121: FONTARGEN HTL 8Nickel-based high-te
Page 122 and 123: FONTARGEN HTL 9 AP (L)Copper-based
Page 124 and 125: FONTARGEN HTL 14Gold-based high-tem
Page 126 and 127: FONTARGEN HTL 17Copper-based high-t
Page 128 and 129: FONTARGEN HTL 270Nickel-based high-
Page 130 and 131: Notes
Page 133 and 134: Fluxesa) Brass and German silver fl
Page 135 and 136: Silver solder fluxesin accordance w
Page 137 and 138: Soft soldering fluxesin accordance
Page 139 and 140: Safety precautionswhile working wit
Page 141: Group 3MIG/MAGSolid and cored wires
Page 144 and 145: MIG/MAG solid and cored wiredf) Cor
Page 146 and 147: FONTARGEN A 100 AMWire electrode ma
Page 148 and 149: FONTARGEN A 1107 MAustenitic Cr-Ni-
Page 150 and 151: FONTARGEN A 1121 MCr-Ni-Mo wire ele
Page 152 and 153: FONTARGEN A 200 MCopper wire electr
Page 154 and 155: FONTARGEN A 202 MCopper-silicon wir
Page 156 and 157:
FONTARGEN A 207 MCu-Si-Mn wire elec
Page 158 and 159:
FONTARGEN A 203/12 MCopper-tin wire
Page 160 and 161:
FONTARGEN A 2115/8 MCopper-aluminiu
Page 162 and 163:
FONTARGEN A 512/30 MCopper-nickel w
Page 164 and 165:
FONTARGEN A 402 MAluminium-magnesiu
Page 166 and 167:
FONTARGEN A 404/4,5 MAluminium-magn
Page 168 and 169:
FONTARGEN A 405 MAluminium-silicon
Page 170 and 171:
FONTARGEN A 7101 MWire electrode of
Page 172 and 173:
FONTARGEN A 751 MFlexible wire for
Page 174 and 175:
FONTARFILL 11Metal powder flux core
Page 176 and 177:
FONTARFILL 712/600Self-shielding fl
Page 178 and 179:
FONTARFILL 7068Self-shielding corde
Page 181 and 182:
Filler rods for TIG welding and gas
Page 183 and 184:
FONTARGEN A 103 NWMolybdenum low-al
Page 185 and 186:
FONTARGEN A 1120 WCr-Ni-Mn welding
Page 187 and 188:
FONTARGEN A 521 WNickel-Chrome weld
Page 189 and 190:
FONTARGEN A 200 SWCopper-tin weldin
Page 191 and 192:
FONTARGEN A 207 WCopper-silicon-man
Page 193 and 194:
FONTARGEN A 203/12 WCopper-tin weld
Page 195 and 196:
FONTARGEN A 216 WCopper-aluminium n
Page 197 and 198:
FONTARGEN A 400 Ti WAluminium weldi
Page 199 and 200:
FONTARGEN A 404 WAluminium-magnesiu
Page 201 and 202:
FONTARGEN A 404/4,5 ZR WAluminium-m
Page 203 and 204:
FONTARGEN A 407 WAluminium-silicon
Page 205 and 206:
FONTARGEN A 850Titanium welding rod
Page 207 and 208:
FONTARGEN A 721Welding rod for hard
Page 209:
Group 5Stick electrodesa) Welding o
Page 212 and 213:
FONTARGEN FE 1001DIN EN 499: E 38 2
Page 214 and 215:
Page 216 and 217:
Page 218 and 219:
FONTARGEN E 1107Austenitic Cr-Ni-Mn
Page 220 and 221:
FONTARGEN E 1125Cr-Ni-Mo stick elec
Page 222 and 223:
FONTARGEN E 138 MoAustenitic stick
Page 224 and 225:
FONTARGEN E 114Basic coating electr
Page 226 and 227:
FONTARGEN E 711Hard-facing electrod
Page 228 and 229:
FONTARGEN E 901Cutting electrode wi
Page 230 and 231:
Notes
Page 233 and 234:
Spraying powdera) Metal powder for
Page 235 and 236:
FONTARGEN MP 3Metal powder for diff
Page 237 and 238:
FONTARGEN MP 4Metal powder for diff
Page 239 and 240:
FONTARGEN MP 5 FMetal powder for di
Page 241 and 242:
FONTARGEN FM 2Metal powder for flam
Page 243 and 244:
FONTARGEN FM 4Metal powder for flam
Page 245:
Group 7Special productsa) FONTARFIX
Page 248 and 249:
FONTARGEN FONTARFIXFONTARFIX is an
Page 250 and 251:
FONTARGEN FONTEX NEPickling powder
Page 252 and 253:
FONTARGEN FONTINOX FRSurface cleane
Page 254 and 255:
FONTARGEN Neutralisation pasteThe n
Page 256 and 257:
FONTARGEN cleaning and degreasing s
Page 258 and 259:
Notes
Page 261 and 262:
Welding of low- and high-alloyed st
Page 263 and 264:
Welding of low- and high-alloyed st
Page 265 and 266:
Welding of cold-tough steel and cas
Page 267 and 268:
Welding of nickel and nickel alloys
Page 269 and 270:
Welding of copper and copper alloys
Page 271 and 272:
Welding of copper and copper alloys
Page 273 and 274:
Welding of aluminium and aluminium
Page 275 and 276:
Physical property values of some al
Page 277 and 278:
Notes
Page 279 and 280:
Notes
Page 281:
All information concerning our prod
show all

FONTARGEN A/AF 314

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?