FONTARGEN A/AF 314

FONTARGEN HTL 9 AP (L)Copper-based high-temperature brazing alloyAMS:4764 EComposition, typical analysis (% w/w):Cu Ni Mn52,5 9,5 RemainderMechanical and physical properties:Working temperature: 1010- 1093°C,recomm. brazing temp. 1065°CMelting range: 879- 927°CGap width:up to 0,02- 0,08 mmOxidationresistant up to: 538°CCharacteristics / Applications:The flux-free brazing alloy HTL 9 is used for joints on Cu-, Fe- and Ni-based alloys as wellas on stainless Cr-Ni-steel. This brazing alloy is used especially in the aviation, nucleartechnology and the chemical industry. It is easy to dispense and dries slowly on air.Application:Manually or automatically with pneumatical or mechanical dispensing units. Moreinformation in the dosing technology brochure from Fontargen.Heat sources:Inert-gas continuousfurnaceArgonInert-gas continuousfurnaceHydrogenVacuum furnaceAvailability:Paste HTL 9 AP (L)Powder08/08/He/0121