FONTARGEN A/AF 314

FONTARGEN A/AF 605Eutectic soft solder with low melting pointEN ISO 9453:A 605DIN EN 29454.1 (Flux):AF 605DIN EN 29454.1 (Flux):Alloy-no. 151/ S – Sn 50 Pb 32 Cd18Full wireF 600: 3.1.1.A (corrosive fluid, for low alloyedand alloyed steel and heavy metals)F 600 CW: 3.1.1.C (paste-like, soldering flux,activated, limited corrosive)F 600 CC: 1.1.2. (paste-like, colophony based)F 600 AL: 2.1.2 (soldering oil, limited corrosive,for aluminium and copper/copper alloys)Soft solder with active flux core1.1.2 (non corrosive flux, colophony based)Composition, typical analysis (% w/w):Cd Sn Sb Pb18,0 50,0 0,10 RemainderMechanical and physical properties:Melting range: 145°CTensile strength (solder):43 N/mm²On Ms 58:99 N/mm²Shear strength on Cu:30 N/mm²On Ms:20 N/mm²On St:15 N/mm²Hardness (BHN):12 HBElectrical conductivity: 7,6g/cm 3Specific gravity (metal): 8,5g/cm 3Characteristics / Applications:Solders on steel, copper and copper alloys. Particularly well suited for delicate jobs thatrequire the lowest working temperatures possible. Engineering of electrical and generalapparatus. Also for phased solders, tin goods, fuses and condensers. Capillary activesolder with very good flowing properties and eutectic melting point. Suitable for step-bystepsolders.Heat sources:Acetylene torch (fuel gas excess), air-gas torch,soldering lamp, soldering iron, dip bath.Availability:Bare Coatedrods rodsWire Foil Preforms Powder Paste09/08/DE/073