FONTARGEN A/AF 314

FONTARGEN A 204Copper-phosphorus alloyDIN EN 1044: CP 201DIN 8513: L-Cu P 8EN ISO 3677: B-Cu 92 P – 710/770AWS A 5.8: B Cu P – 2Material-no.: 2.1465Composition, typical analysis (% w/w):CuP92,2 7,8Mechanical and physical properties:Working temperature: 720°CMelting range: 710 – 770°CSpecific gravity:8,0 g/cm³Tensile strength:250 N/mm²Elongation: 5 %Electrical conductivity:3,5 S m/mm²Characteristics / Applications:Filler metal with very good flowing properties and high capillarity. Suitable for gapbrazing of copper and copper alloys. Joint-brazing at working temperatures between-20°C and +150°C. Do not use in sulphurous environment and on Fe- and Ni-alloys.Heat sources:Acetylene torch, induction and resistance heating, WIG-torch.Flux:Only copper alloys require the use of fluxF 300 – SeriesAvailability:Bare Coatedrods rodsWire Foil Preforms Powder Paste07/08/SR/017