FONTARGEN A/AF 314

FONTARGEN MP 5 FMetal powder for diffusion deposit sprayingDIN EN 1274: 2.2DIN 32529: Similar to A 1.3Composition, typical analysis (% w/w):C Si B Fe Ni0,03 2,4 1,4 0,4 RemainderMechanical and physical properties:Working temperature: approx. 1100°CMelting range: 1090 – 1120°CHardness:230 HVSpecific gravity: 4,9 g/cm 3Grain size:15 – 53 μmCharacteristics / Applications:Nickel alloy with good flowing properties, heat and corrosion resistance.Deposits on alloyed and unalloyed steels, stainless steel and cast iron. Repairs of glassmoulds, moulds for the rubber industry, filling up shrinkage cavities on cast iron, build-upof edges on slide rails. MP 5 F is also suitable for welded joints on steel and cast iron.Heat sources:Powder deposit torch (oxy-acetylene; only use cylinder gas). Flame setting: neutral toslight gas excess.Availability:Bare Coatedrods rodsWire Foil Preforms Powder Paste11/08/Eb/0238