FONTARGEN A/AF 314

FONTARGEN A 2003Copper-phosphorus alloyDIN EN 1044: CP 202DIN 8513: L-Cu P 7EN ISO 3677: B-Cu 93 P – 710/820AWS A 5.8: B Cu P – 2Material-no.: 2.1463Composition, typical analysis (% w/w):CuP93 7Mechanical and physical properties:Working temperature: 730°CMelting range: 710 – 820°CSpecific gravity:8,1 g/cm³Tensile strength:250 N/mm²Elongation: 5 %Characteristics / Applications:Filler metal with good flowing properties and capillarity. Suitable for gap brazing ofcopper and copper alloys. Joint-brazing at working temperatures between -20°C and+150°C. Do not use in sulphurous environment and on Fe- and Ni-alloys.Heat sources:Acetylene torch, induction and resistance heating, TIG-torch.Flux:Only copper alloys require the use of fluxF 300 – SeriesAvailability:Bare Coatedrods rodsWire Foil Preforms Powder Paste07/08/SR/018