FONTARGEN A/AF 314

FONTARGEN A 2004Copper-phosphorus alloyDIN EN 1044: CP 203DIN 8513: L-Cu P 6EN ISO 3677: B-Cu 94 P – 710/890Material-no.: 2.1462Composition, typical analysis (% w/w):CuP93,8 6,2Mechanical and physical properties:Working temperature: 760°CMelting range: 710 – 890°CSpecific gravity:8,1 g/cm³Tensile strength:250 N/mm²Elongation: 5 %Characteristics / Applications:Filler metal with good flowing properties and capillarity. Suitable for gap brazing ofcopper and copper alloys. Joint-brazing at working temperatures between -20°C and+150°C. Do not use in sulphurous environment and on Fe- and Ni-alloys.Heat sources:Acetylene torch, induction and resistance heating, WIG-torch.Flux:Only copper alloys require the use of fluxF 300 – SeriesAvailability:Bare Coatedrods rodsWire Foil Preforms Powder Paste07/08/SR/019