FONTARGEN A/AF 314

FONTARGEN A 400 Ti MAluminium wire electrode for MIG weldingEN ISO 18273:S Al 1450 (Al 99,5 Ti)Material-no.: 3.0805Composition, typical analysis (% w/w):Fe Si Cu Zn Ti Al0,4 0,2 0,05 0,07 0,1 RemainderCharacteristics / Applications:Aluminium alloy with good fluidity. Can be welded in all positions. The Ti-content ensuresa grain refinement of the welding deposit. Joint welding of base materials: Al 98; Al 99;Al 99,5; Al 99,8 und Al 99,7. For plates thicker than 15mm preheat to a min. of 150°C.Mechanical properties of pure welding deposit(Min. values at RT):Melting range: 647 – 658°CTensile strength:65 N/mm²Yield strength (0,2%):30 N/mm²Elongation (l=5d): 35 %Electrical conductivity:34 – 36 Sm/mm²Heat conductivity:210 – 230 W/m • KSpecific gravity:2,71 g/cm³Linear expansion: 23,5 • 10 -6 /KWelding process:MIGShielding gas (DIN EN 439): l 1 (Argon)l 3 (Argon/Helium mixture)Current mode:Direct current (+pole)Availability: Diameter (mm): 0,8/1,0/1,2/1,6/2,4Spool type:B300Welding position: according to DIN EN 287PA PB PC PD PE PF PG08/08/Eb/0162