FONTARGEN A/AF 314

FONTARFILL 11Metal powder flux cored electrode for MAG-weldingDIN EN ISO 17632, Teil A: T 46 4 M M 1 H5DIN 8559: SA B 1 C4 42 54 / SG B 1 M 21 Y 42 54AWS A 5.20: E 71 T - 1Composition, guiding analysis (.-%):C Mn Si P S0,05 1,3 0,5 < 0,015 < 0,015Characteristics / Properties:High-efficiency metal powder cored welding wire. A low formation of oxides makes amultiple welding possible without cleaning; slagless. Well suitable for robot-welding orrather for fully mechanised welding processes, e.g. for the car industry. The electrode hasto be welded by slightly forehand welding. Try to use a water cooled torch. Stablewelding properties at low to high amperage grant good results on material thicknesses ofmore than 2mm. Applicable in short-arc welding, therefore suitable for bridging of gapsand out-of-position welding. Deposit with a low content of hydrogen < 3ml/100g.Base materials:Structural steels:S185,S 235, J 2G3, S 27572G3, E 295, P 235-GH-P265GH, P 295GH, P 355GH,S 275N - S 420NL, P 275NH, P 355NH, P 460NH, P 275NL1, P 355NL1, P 460NL1St 35, St 35.4, St 35.8 – St 45, St 52-4L210, L 240, L 290, L 360 MB, L 414MBGS-38 – GS-52Ship building steels: grade A – E, AH32 – EH36Mechanical properties of welding deposit(min. values at room temperature):Tensile strength: 550-650 N/mm 2Yield strength: 470 N/mm 2Elongation: 27 %Impact energy:-20°C: 100 J-40°C: 60 JWelding process:MAGMShielding gases (DIN EN 439): M 21 (18 % CO 2 , remainder Ar)Current mode:DC (+pole)Spool type:B300Availability: Diameter (mm): 1,0/1,2Approval:TÜV, DB (42.046.02/QS)Welding positions: DIN EN 287PA PB PC PD PE PF PG01/09/Eb/1173