FONTARGEN A/AF 314

FONTARGEN MP 5Metal powder for diffusion deposit sprayingDIN EN 1274: 2.2DIN 32529: Similar to A 1.3Composition, typical analysis (% w/w):C Si B Fe Ni0,03 2,4 1,4 0,4 RemainderMechanical and physical properties:Working temperature: approx. 1100°CMelting range: 1090 – 1120°CHardness:230 HVSpecific gravity: 5,1 g/cm 3Grain size:20 – 106 μmCharacteristics / Applications:Nickel alloy with very good flow properties. Resistant to high temperatures andcorrosion. Deposits on alloyed and unalloyed steels stainless steel and cast iron. Repairsto glass moulds, moulds for the rubber-industry, filling up shrinkage cavities on cast iron,build-up of edges on slide rails. MP 5 can be used for welded joints on steel and castiron.Heat sources:Powder deposit torch (oxy-acetylene; only use cylinder gas). Flame setting: neutral toslight gas excess.Availability:Bare Coatedrods rodsWire Foil Preforms Powder Paste11/08/Eb/0237