FONTARGEN A/AF 314

FONTARGEN E 1124Austenitic Cr-Ni stick electrodeDIN EN 1600: E 19 9 L R 3 2Material-no.: 1.4316AWS SFA 5.4: E 308 L – 17Composition, typical analysis (% w/w):C Si Mn Cr Ni< 0,035 < 0,9 0,9 19,5 10,0Mechanical and physical properties according to DIN EN 1597-1(Min. properties at room temperature):Tensile strength:550 N/mm²0,2 %-limit: 320 N/mm²1,0 %-limit: 350 N/mm²Elongation: 35 %Impact energy:65 (20°C), > 40 (- 80°C), > 30 (- 196°C) JCharacteristics / Applications:Austenitic rutile electrode of ELC quality for joint and build-up welding on unstabilised,corrosion-proof and cold tough 18/8 Cr-Ni steels. Joint welding of ferritic Cr steels (max.of 18% Cr), only for root and intermediate beads if exposed to sulphide corrosion.Suitable for steels of material numbers: 1.4301, 1.4306, 1.4308, 1.4311, 1.4312,1.4371, 1.4541, 1.4543, 1.4550, 1.4552, 1.4948, 1.6900, 1.6901, 1.6902,1.6903, 1.6905, 1.6906, 1.6907. This stick electrode is also very well suitable forpower line-fed transformers and rectifiers. Works only with dry electrodes.Austenitic welding deposit with ferrite content of 5-9%. Rustproof. Immersion corrosionresistantat wet corrosion up to 350 °C. In air and oxygenating combustion gases scaleresistantup to 800 °C. Good resistance to nitric acids.Current mode:Direct current (+pole), alternating currentWelding current:Ø mmAmpere2,0 x 300 45 – 602,5 x 300 50 – 803,2 x 350 60 – 1104,0 x 350 90 – 150Approval:TÜVWelding positions: DIN EN 287PA PB PC PD PE PF PG06/08/Eb/0218