FONTARGEN A/AF 314

More documents

Recommendations

Info

<strong>FONTARGEN</strong> Neutralisation pasteThe neutralisation paste is recommended for neutralisation of very acidic pickling pasteof high-grade steel (FONTINOX N) after the pickling.Application:Neutralisation paste is used and well spread after completing the pickling of the seamsand surfaces.To reach a sufficient neutralisation, the same quantity of neutralisation paste must be usedas for the pickling of the applicated high-grade steel pickling paste.The process of neutralisation is completed as soon as there is no visible reaction on thetreated places (formation of blowholes). Residues of paste must be washed off withwater.Brushes of natural or plastic material as well as high-grade steel or wash appliances athigh pressure support the cleaning process.If the reaction of neutralisation paste together with acid pickling paste of high-grad steels(FONTINOX N) is correct, it leads to a neutral connection.The washed off water with the reaction products and the neutralisation paste can bedisposed into the canalisation after separation of the insoluble components. Localregulations of sewage must be considered. After the neutralisation process theneutralised solution has a pH-value of about 7.4.Availability: On request11/08/Eb/0253
<strong>FONTARGEN</strong> PassivatorThe deadening agent serves to treat pickled surfaces and weld seams made of stainlesssteel that require to be deadened quickly after pickling.The deadening agent contains hydrochloric acid and chlorides. Prior to applicationplease attentively read through the safety advice.Application:The pickled and rinsed workpieces can either be painted, dipped or sprayed with thepassivator.Then rinse with fully demineralised (Deionat) water. Flushing is best performed by a highpressurespraying device.Warning:The passivator contains nitric acid and causes very serious burns.Safety advice:- Handle container with care.- Keep container tightly shut and store in a cool, well ventilated room. Do not inhalevapors.- Avoid contact with skin, eyes or clothing.- Immediately take off contaminated clothing.- In case of feeling ill, consult a doctor and show him this technical data sheet.Availability: On request11/08/Eb/0254
Page 2 and 3:
FONTARGEN GmbHSiemensstraße 467304
Page 4 and 5:
ContentsSummary in groups of FONTAR
Page 7 and 8:
Brazing and soldering alloysa) Braz
Page 9 and 10:
Brazing and soldering alloysd) Sold
Page 11 and 12:
FONTARGEN A 101High strength brazin
Page 13 and 14:
FONTARGEN A 210Brass hard solderDIN
Page 15 and 16:
FONTARGEN A 210 MKBrazing rod with
Page 17 and 18:
FONTARGEN A 211 RFBrass hard solder
Page 19 and 20:
FONTARGEN A 2003Copper-phosphorus a
Page 21 and 22:
FONTARGEN A 2005Copper-phosphorus-t
Page 23 and 24:
FONTARGEN A 3002Silver containing c
Page 25 and 26:
FONTARGEN A 3005 SSilver containing
Page 27 and 28:
FONTARGEN A 3018Copper-phosphorus a
Page 29 and 30:
FONTARGEN A 331Silver brazing alloy
Page 31 and 32:
Page 33 and 34:
Page 35 and 36:
Page 37 and 38:
Page 39 and 40:
Page 41 and 42:
Page 43 and 44:
Page 45 and 46:
FONTARGEN A 308 VSilver-Copper-Eute
Page 47 and 48:
FONTARGEN A 341Palladium containing
Page 49 and 50:
FONTARGEN A 345Palladium containing
Page 51 and 52:
FONTARGEN A 407 LAluminium hard sol
Page 53 and 54:
FONTARGEN AP 211 FMFlux containing
Page 55 and 56:
FONTARGEN AP 2003Copper-phosphorus
Page 58 and 59:
FONTARGEN AP 3018Copper-phosphorus
Page 60 and 61:
FONTARGEN AP 306 FMCadmium bearing,
Page 62 and 63:
FONTARGEN AP 320 FMCadminumfree, fl
Page 64 and 65:
FONTARGEN AP 314 ILSilver brazing a
Page 66 and 67:
FONTARGEN AP 317 FMFlux containing
Page 68 and 69:
FONTARGEN AP 350 FMCadminum free, f
Page 70 and 71:
FONTARGEN AP 46 QL/3Aluminium brazi
Page 72 and 73:
FONTARGEN A 604Friction solderDIN E
Page 74 and 75:
FONTARGEN A/AF 605Eutectic soft sol
Page 76 and 77:
FONTARGEN A/AF 612Antimony-free sof
Page 78 and 79:
FONTARGEN A 630Soft solderEN ISO 94
Page 80 and 81:
FONTARGEN A 644Copper-bearing, lead
Page 82 and 83:
FONTARGEN AP 604/12Tinning solderin
Page 84 and 85:
FONTARGEN AP 638/26 NFlux containin
Page 86 and 87:
FONTARGEN AP 644/21Lead free tin co
Page 88 and 89:
FONTARGEN A 200 LCopper brazing all
Page 90 and 91:
FONTARGEN A 200/2 LCopper-based hig
Page 92 and 93:
FONTARGEN A 203/6 LCopper-based hig
Page 94 and 95:
FONTARGEN A 205Copper-based high-te
Page 96 and 97:
FONTARGEN AP 20 AL DBCopper high-te
Page 98 and 99:
FONTARGEN AP 21 AL CCopper high-tem
Page 100 and 101:
FONTARGEN AP 21 CLPCopper high-temp
Page 102 and 103:
FONTARGEN AP 21 DL / DSCopper- nick
Page 104 and 105:
FONTARGEN AP 21 GL / GSCopper- tin-
Page 106 and 107:
FONTARGEN AP 21 KLCopper- tin- braz
Page 108 and 109:
FONTARGEN AP 22 LLCopper- tin- braz
Page 110 and 111:
FONTARGEN HTL 1ANickel-based high-t
Page 112 and 113:
FONTARGEN HTL 2 AP (L)Nickel-based
Page 114 and 115:
FONTARGEN HTL 3Nickel-based high-te
Page 116 and 117:
FONTARGEN HTL 5 MNickel-based high-
Page 118 and 119:
FONTARGEN HTL 6 AP BNickel-based hi
Page 120 and 121:
FONTARGEN HTL 8Nickel-based high-te
Page 122 and 123:
FONTARGEN HTL 9 AP (L)Copper-based
Page 124 and 125:
FONTARGEN HTL 14Gold-based high-tem
Page 126 and 127:
FONTARGEN HTL 17Copper-based high-t
Page 128 and 129:
FONTARGEN HTL 270Nickel-based high-
Page 130 and 131:
Notes
Page 133 and 134:
Fluxesa) Brass and German silver fl
Page 135 and 136:
Silver solder fluxesin accordance w
Page 137 and 138:
Soft soldering fluxesin accordance
Page 139 and 140:
Safety precautionswhile working wit
Page 141:
Group 3MIG/MAGSolid and cored wires
Page 144 and 145:
MIG/MAG solid and cored wiredf) Cor
Page 146 and 147:
FONTARGEN A 100 AMWire electrode ma
Page 148 and 149:
FONTARGEN A 1107 MAustenitic Cr-Ni-
Page 150 and 151:
FONTARGEN A 1121 MCr-Ni-Mo wire ele
Page 152 and 153:
FONTARGEN A 200 MCopper wire electr
Page 154 and 155:
FONTARGEN A 202 MCopper-silicon wir
Page 156 and 157:
FONTARGEN A 207 MCu-Si-Mn wire elec
Page 158 and 159:
FONTARGEN A 203/12 MCopper-tin wire
Page 160 and 161:
FONTARGEN A 2115/8 MCopper-aluminiu
Page 162 and 163:
FONTARGEN A 512/30 MCopper-nickel w
Page 164 and 165:
FONTARGEN A 402 MAluminium-magnesiu
Page 166 and 167:
FONTARGEN A 404/4,5 MAluminium-magn
Page 168 and 169:
FONTARGEN A 405 MAluminium-silicon
Page 170 and 171:
FONTARGEN A 7101 MWire electrode of
Page 172 and 173:
FONTARGEN A 751 MFlexible wire for
Page 174 and 175:
FONTARFILL 11Metal powder flux core
Page 176 and 177:
FONTARFILL 712/600Self-shielding fl
Page 178 and 179:
FONTARFILL 7068Self-shielding corde
Page 181 and 182:
Filler rods for TIG welding and gas
Page 183 and 184:
FONTARGEN A 103 NWMolybdenum low-al
Page 185 and 186:
FONTARGEN A 1120 WCr-Ni-Mn welding
Page 187 and 188:
FONTARGEN A 521 WNickel-Chrome weld
Page 189 and 190:
FONTARGEN A 200 SWCopper-tin weldin
Page 191 and 192:
FONTARGEN A 207 WCopper-silicon-man
Page 193 and 194:
FONTARGEN A 203/12 WCopper-tin weld
Page 195 and 196:
FONTARGEN A 216 WCopper-aluminium n
Page 197 and 198:
FONTARGEN A 400 Ti WAluminium weldi
Page 199 and 200:
FONTARGEN A 404 WAluminium-magnesiu
Page 201 and 202:
FONTARGEN A 404/4,5 ZR WAluminium-m
Page 203 and 204: FONTARGEN A 407 WAluminium-silicon
Page 205 and 206: FONTARGEN A 850Titanium welding rod
Page 207 and 208: FONTARGEN A 721Welding rod for hard
Page 209: Group 5Stick electrodesa) Welding o
Page 212 and 213: FONTARGEN FE 1001DIN EN 499: E 38 2
Page 218 and 219: FONTARGEN E 1107Austenitic Cr-Ni-Mn
Page 220 and 221: FONTARGEN E 1125Cr-Ni-Mo stick elec
Page 222 and 223: FONTARGEN E 138 MoAustenitic stick
Page 224 and 225: FONTARGEN E 114Basic coating electr
Page 226 and 227: FONTARGEN E 711Hard-facing electrod
Page 228 and 229: FONTARGEN E 901Cutting electrode wi
Page 230 and 231: Notes
Page 233 and 234: Spraying powdera) Metal powder for
Page 235 and 236: FONTARGEN MP 3Metal powder for diff
Page 237 and 238: FONTARGEN MP 4Metal powder for diff
Page 239 and 240: FONTARGEN MP 5 FMetal powder for di
Page 241 and 242: FONTARGEN FM 2Metal powder for flam
Page 243 and 244: FONTARGEN FM 4Metal powder for flam
Page 245: Group 7Special productsa) FONTARFIX
Page 248 and 249: FONTARGEN FONTARFIXFONTARFIX is an
Page 250 and 251: FONTARGEN FONTEX NEPickling powder
Page 252 and 253: FONTARGEN FONTINOX FRSurface cleane
Page 256 and 257: FONTARGEN cleaning and degreasing s
Page 261 and 262: Welding of low- and high-alloyed st
Page 263 and 264: Welding of low- and high-alloyed st
Page 265 and 266: Welding of cold-tough steel and cas
Page 267 and 268: Welding of nickel and nickel alloys
Page 269 and 270: Welding of copper and copper alloys
Page 271 and 272: Welding of copper and copper alloys
Page 273 and 274: Welding of aluminium and aluminium
Page 275 and 276: Physical property values of some al
Page 281: All information concerning our prod
show all

FONTARGEN A/AF 314

Create successful ePaper yourself

Delete template?

Save as template?