FONTARGEN A/AF 314

FONTARGEN HTL 6Nickel-based high-temperature brazing pasteDIN EN 1044: NI 106DIN 8513:L-Ni6EN ISO 3677:B-Ni89P-875AWS:B Ni-6Composition, typical analysis (% w/w):P C Ni11,0 < 0,06 RemainderMechanical and physical properties:Working temperature: 927 - 1093°C,recomm. brazing temp. 980°CMelting range: 875°CGap width:up to 0,05 mmViscosity range:60.000 - 80.000 mPasMetal content:≈ 90 % w/wOxidationresistant up to: 760°CCharacteristics / Applications:The brazing alloy HTL 6 has outstanding wetting properties. No erosion occurs whilebrazing on Fe- or Ni-based materials. The brazing alloy is applicable on currentless NiPcoatedassemblies. Iron-, nickel-, cobalt- and special materials. Suited for workpieceswhich come in contact with food. Good flowing properties at low diffusibility.Application:Manually or automatically with pneumatical or mechanical dispensing units. Moreinformation in the dosing technology brochure from Fontargen.Heat sources:Inert-gas continuousfurnaceExogas / cracked NH 3Inert-gas continuousfurnaceHydrogenVacuum furnaceAvailability:Paste HTL 6 AP Powder HTL 608/08/He/0116