FONTARGEN A/AF 314

FONTARGEN E 1107Austenitic Cr-Ni-Mn stick electrodeDIN EN 1600: E 18 8 Mn 6 R 26AWS A 5.4:E 307 – 16 (mod.)Material-no.: 1.4370Composition, typical analysis (% w/w):C Si Mn Cr Ni Fe0,10 0,6 7,0 18,5 9,0 RemainderCharacteristics / Applications:Joint welding of high-, low-, and unalloyed steels. Welding of manganese hard steel.Joint welding of construction and high heating steels with a high carbon content. Wearresistant armouring, e.g.: rails, points, frogs and buffer layers.Austenitic electrode with high strength and elongation. Scale-resistant up to 850°C,stainless, cold tough. The welding deposit is tough, crack- and abrasion resistant.Mechanical and physical properties according to DIN EN 1597-1(Min. properties at room temperature):Tensile strength:600 N/mm²0,2 %.-limit: 350 N/mm²Hardness (BHN):200 HBElongation: 40 %Impact energy:100 JCurrent mode:Direct current (+pole), alternating currentWelding current:Ø mmAmpere2,5 x 300 45 – 823,2 x 350 70 – 1204,0 x 350 110 – 150Welding positions: in accordance to DIN EN 287PA PB PC PD PE PF PG06/08/Eb/0217