FONTARGEN A/AF 314

FONTARGEN MP 1Metal powder for diffusion deposit sprayingDIN EN 1274: ~ 2.16DIN 32529: A 2.3Composition, typical analysis (% w/w):C Si Cr Fe B Ni0,75 4,3 14,8 3,7 3,1 RemainderMechanical and physical properties:Working temperature: approx. 1000°CMelting range: 980 – 1020°CHardness:810 HV (64 HRC)Grain size:20 – 106 μmCharacteristics / Applications:Deposits on alloyed and unalloyed steels subjected to very severe abrasive wear,oxidation and corrosion. Conveyor worm-screws and -belts, mixer blades, scoops.Surfacing on alloyed and unalloyed steels as well as cast iron subject to high severewear and corrosive attacks. Valves and valve seats, conveyor belts, conveyor wormscrews,cams, pump shafts, etc.Heat sources:Powder deposit torch (oxy-acetylene; only use cylinder gas). Flame setting: neutral toslight gas excess.Availability:Bare CoatedWire Foil Preforms Powder Pasterods rods11/08/Eb/0233