FONTARGEN A/AF 314

FONTARGEN A/AF 612Antimony-free soft solder alloyEN ISO 9453: Alloy-no. 104 /S – Sn 60 Pb 40A 612DIN EN 29454.1 (Flux):AF 612DIN EN 29454.1 (Flux) :Solid wireF 600: 3.1.1.A (corrosive fluid, for unalloyed andlow alloyed steel and heavy metals)F 600 CW: 3.1.1.C (paste-like, soldering flux,activated, limited corrosive)F 600 CC: 1.1.2. (paste-like, colophony based)Soft solder with active flux core1.1.2 (non corrosive flux, colophony based)Composition, typical analysis (% w/w):Sn Sb Pb60,0 0,12 RemainderMechanical and physical properties:Melting range:183-190°CTensile strength (solder):29 N/mm²On Ms 58:78 N/mm²Hardness (BHN):13 HBElectrical conductivity:7 Sm/mm²Specific gravity (metal): 8,5 g/cm 3Characteristics / Applications:General soldering work on iron and copper based metals without flux. Electrical industryand construction of electrical and general apparatuses. Tin plating. Lead-bearing softsolder with very narrow melting interval. Very fluid with good wetting properties oncopper and ferrous metals. AF 612 enables good bonds with cuprous base metalswithout additional flux.Heat sources:Acetylene torch (fuel gas excess), air-gas torch, soldering lamp, soldering iron.Availability:Bare Coatedrods rodsWire Foil Preforms Powder Paste09/08/DE/075