FONTARGEN A/AF 314

FONTARGEN FE 1013DIN EN 499: E 42 3 B 12ISO 2560:E 51.4 B 23 (H)AWS A 5.15: E 7016Composition, typical analysis (% w/w):C Mn Si Fe0,06 1,05 0,65 RemainderCharacteristics / Applications:Basic coated electrode. Applicable for industry and handcraft for installation-workshopsand repair welding. Weldable on direct- and alternating current in all positions, besidesdownwards. Good root and out-of-position welding. Good weldability on smalltransformers (42 V). Redrying: 2h at 250 – 300°C.Base material:S235JRG2 – S355J2, boiler plates P235GH, P265GH, P295GH, P355GH; Finegrainedconstruction steels up to S355N; tubular steels St 35, St 35.8, L210 – L360NB,GS-52, L290MB – L360MBMechanical and physical analysis according to DIN EN 1597-1(Min. properties at room temperature):Tensile strength:510 N/mm²Elongation limit:420 N/mm²Elongation: 22 %Impact energy:55 JCurrent mode:Direct current (+pole or –pole), alternatingcurrentWelding current:Ø mmAmpere2,5 x 350 60 – 903,2 x 350 (450) 95 – 1504,0 x 450 140 – 1905,0 x 450 190 – 250Approval:TÜV; DB (10.046.02/QS)Welding positions: according to DIN EN 287PA PB PC PD PE PF PG06/08/Eb/0214