FONTARGEN A/AF 314

FONTARGEN HTL 8Nickel-based high-temperature brazing pasteDIN EN 1044: NI 108DIN 8513:L-Ni8EN ISO 3677: B-Ni66MnSiCu-980/ 1010AWS:B Ni-8Composition, typical analysis (% w/w):Mn Cu Si C P Ni23,0 4,5 7,0 < 0,06 < 0,02 RemainderMechanical and physical properties:Working temperature: 1010- 1093°C,recomm. brazing temp. 1065°CMelting range: 890- 1010°CGap width:up to 0,05 mmOxidationresistant up to: 816°CCharacteristics / Applications:The flux-free brazing alloy HTL 8 is used for brazing of heat exchangers, honeycombstructuresas well as temperable or stainless steel. The operation of this brazing alloyrequires a very good furnace atmosphere. Iron-, nickel-, cobalt- and special materials areto be brazed with this alloy. Good flowing properties at low diffusibility.Application:Manually or automatically with pneumatical or mechanical dispensing units. Moreinformation in the dosing technology brochure from Fontargen.Heat sources:Inert-gas continuousfurnaceArgonInert-gas continuousfurnaceHydrogenVacuum furnaceAvailability:Paste HTL 8 AP Powder HTL 808/08/He/0119