FONTARGEN A/AF 314

FONTARGEN E 726/60Cobalt-based rutile-basic coated stick electrodeDIN EN 14700: E Co 3AWS A 5.13:E Co Cr – CComposition, typical analysis (% w/w):C Cr W Si Fe Ni Mn Mo Co2,3 32,0 12,0 0,8 2,0 1,7 0,4 0,1 RemainderCharacteristics / Applications:Welding deposit with very good resistance to abrasion and very high resistance tocavitation pitting and erosion under low striking and impacting. Excellent glidingproperties. High resistance to corrosion and heat (up to 800°C, for a short while up to1100°C).Build-up welding on parts with high corrosion-, oxidation-, heat- and wear resistance.Bolts, valves, augers, heat extruders, hot shearing-blades, moulds and cutting edges.Chemical, petroleum and sugar industries and steel mills.Mechanical and physical properties according to DIN EN 1597-1(Min. properties at room temperature):Hardness:Elevated temperature hardness:56 HRC450 (500°C)400 (600°C)340 (700°C)Melting range: 1260 – 1300°CSpecific gravity:8,5 g/cm³Current mode:Direct current (+pole), alternating currentWelding current:Ø mmAmpere3,2 x 350 90 – 120Welding positions: according to DIN EN 287PA PB PC PD PE PF PG06/08/Eb/0226