FONTARGEN A/AF 314

FONTARGEN A 3015Copper-phosphorus alloy with high silver contentDIN EN 1044: CP 102DIN 8513:L-Ag 15 PEN ISO 3677: B-Cu 80 Ag P – 645/800AWS A 5.8: B Cu P – 5Material-no.: 2.1210Composition, typical analysis (% w/w):Ag Cu P15 80 5Mechanical and physical properties:Working temperature: 700°CMelting range: 645 – 800°CSpecific gravity:8,4 g/cm³Tensile strength:250N/mm²Elongation: 10 %Electrical conductivity:7 S m/mm²Characteristics / Applications:Thin fluid copper-phosphorus alloy with high silver content and high ductility, even at lowtemperatures. Suitable for gap brazing of copper and copper alloys. Recommended forjoints with strong thermal load and vibrations. Joint-brazing at working temperaturesbetween -70°C and +150°C. Do not use in sulphurous environment and on Fe- and Nialloys.Heat sources:Acetylene torch, induction and resistance heating, TIG-torch.Flux:Only copper alloys require the use of fluxF 300 – SeriesAvailability:Bare Coatedrods rodsWire Foil Preforms Powder Paste07/08/SR/025