FONTARGEN A/AF 314

FONTARGEN A 210 MKBrazing rod with flux impressed in notchesDIN EN 1044: CU 306DIN 8513:L-Cu Zn 39 SnEN ISO 3677: B-Cu 59 Zn Sn (Ni) (Mn) (Si) – 870/890Material-no.: 2.0533Composition, typical analysis (% w/w):Cu Sn Si Mn Ni Zn59 1 0,3 0,6 0,85 RemainderMechanical and physical properties:Working temperature: 900°CMelting range: 875 – 895°CSpecific gravity:8,4 g/cm³Tensile strength:380 – 420 N/mm²Elongation: 30 %Hardness:120 BHNCharacteristics / Applications:Particularly thin brazing alloy, insensitive to overheating for gap brazing and coating ofsteel, cast iron, malleable cast iron, nickel and nickel alloys, as well as copper andcopper alloys with a solidus of > 900 °C. Also suitable for gap brazing of galvanisedsteel tubes.Heat sources:Acetylene torch: For copper materials and galvanised steel → Oxygen-excess flameOther base metals → Neutral flameFlux:F 100 – SeriesRapidflux - SeriesApproval:Germanischer Lloyd (G.L.)Galvanised steel pipes of drinking water installations in accordance with DIN 1988-2Availability:Bare Coatedrods rodsWire Foil Preforms Powder Paste07/08/SR/014