FONTARGEN A/AF 314

Soft soldering fluxesin accordance with DIN EN 29454 (DIN 8511)The following soft soldering fluxes are featured in the FONTARGEN program:F 600 (3.1.1.A / F-SW12) easy to spread liquid, corrosiveBrazing of copper and copper alloys, alloyed and unalloyed steel.F 600 S15 (3.2.2.A / F-SW11) liquid, corrosiveBrazing of copper and copper alloys, alloyed and unalloyed steel. Suitable forgalvanised plate.F 600 LW (3.2.2.A / F-SW12) liquid, corrosiveBrazing of copper and copper alloys, alloyed and unalloyed steel.F 600 E (3.1.1.A / F-SW12) soldering fluid, corrosiveBrazing of copper and copper alloys.F 600 A (3.1.1.A / F-SW12) liquid, corrosiveBrazing of copper and copper alloys for plumbing and radiator construction. Lowhalogen content.F 600 CW (3.1.1.C / F-SW21) paste, non-corrosiveHigh quality flux for soldering of pipe installation e.g. copper pipes. DVGW-approved.F 600 C (3.1.1.C / F-SW21) solder cream, slightly corrosiveBrazing of copper.F 600 CC (1.1.2.C / F-SW26) paste, non-corrosiveColophony-based flux, suitable for brazing in the electrical engineering and electronics.F 600 AL (2.1.2.A / F-LW3) oil, non-corrosiveBrazing of aluminium, copper and copper alloys.F 600 N16 (1.1.3.A / F-SW32) liquid, non-corrosiveHalogen-free flux on the base of colophony for brazing of copper.F 600 ZN (not standardised) paste, non-corrosiveBrazing of aluminium, aluminium alloys and aluminium-copper alloys with zinc-aluminiumsolders at a temperature of approx. 380 – 500°C.07/08/SR/0136