FONTARGEN A/AF 314

FONTARGEN A 3005Silver containing copper-phosphorus alloyDIN EN 1044: CP 104DIN 8513:L-Ag 5 PEN ISO 3677: B-Cu 89 P Ag – 645/815AWS A 5.8: B Cu P – 3Material-no.: 2.1466Composition, typical analysis (% w/w):Ag Cu P5 89 6Mechanical and physical properties:Working temperature: 710°CMelting range: 645 – 815°CSpecific gravity:8,2 g/cm³Tensile strength:250 N/mm²Elongation: 8 %Electrical conductivity:5 S m/mm²Characteristics / Applications:Copper-phosphorus alloy with low silver content, good flowing properties and highductility. Suitable for gap brazing of copper and copper alloys. Joint-brazing at workingtemperatures between -20°C and +150°C. Do not use in sulphurous environment andon Fe- and Ni-alloys.Heat sources:Acetylene torch, induction and resistance heating, WIG-torch.Flux:Only copper alloys require the use of fluxF 300 – SeriesAvailability:Bare CoatedWire Foil Preforms Powder Pasterods rods07/08/SR/023