FONTARGEN A/AF 314

FONTARGEN A 102High strength German silver brazing alloyDIN EN 1044:CU 305 (modified)DIN 8513:L-Cu Ni 10 Zn 42 + AgEN ISO 3677: B-Cu 48 Zn Ni Ag (Si) – 870/900Composition, typical analysis (% w/w):Cu Ni Ag Si Mn Sn Zn48 9,5 1 0,25 < 0,2 < 0,2 RemainderMechanical and physical properties:Working temperature: 890°CMelting range: 870 – 900°CSpecific gravity:8,2 g/cm³Tensile strength:785 N/mm²Elongation: 17 – 21 %Characteristics / Applications:Nickel-bearing filler metal of high strength and good fluidity. Suitable for gap brazing ofsteel, cast iron, malleable cast iron, nickel and nickel alloys. This alloy is very well suitedfor butt joints.Heat sources:Acetylene torch, induction and resistance heatingFlux:F 100 – SeriesRapidflux - SeriesAvailability:Bare Coatedrods rodsWire Foil Preforms Powder Paste07/08/SR/011