FONTARGEN A/AF 314

FONTARGEN A 402 WAluminium welding rodEN ISO 18273: S Al 5754 (Al Mg 3)DIN 1732: SG – Al Mg 3AWS A 5.10: ER 5754Material-no.: 3.3536Composition, typical analysis (% w/w):Mg Mn Fe Si Cr Ti Al3,0 0,3 0,2 0,2 0,1 0,1 RemainderCharacteristics / Applications:Corrosion- and saltwater-proof alloy. Easily anodised. Welding of rolled and castaluminium-magnesium alloys e.g. Al Mg 3, Al Mg Mn, Al Mg 1, Al Mg 2, Al Mg Si 0,5,Al Mg Si 0,8, G-Al Mg 3, G-Al Mg 3 (Cu), G-Al Mg 3 Si. Manufacturing of containers,aluminium constructions, constructions of vehicles, ship building, window and doorframes. Plates thicker than 15mm must be preheated to approx. 150°C – 200°C.Mechanical properties of pure welding deposit(Min. values at room temperature):Melting range: 615 – 642°CTensile strength:190 N/mm²Yield strength (0,2%):80 N/mm²Elongation (l=5d): 20 %Electrical conductivity:20 – 23 Sm/mm²Specific gravity:2,66 g/cm³Welding process:WIGShielding gas (DIN EN 439): l 1 (argon)L 3 (argon/helium mixture)Current mode:Alternating currentAvailability: Diameter (mm): 1,6/2,0/2,4/3,2Length (mm): 1000Welding positions: according to DIN EN 287PA PB PC PD PE PF PG06/08/Eb/0197