FONTARGEN A/AF 314

FONTARGEN A 404 WAluminium-magnesium welding rodEN ISO 18273:S Al 5356 (Al Mg 5 Cr (A))DIN 1732: SG – Al Mg 5AWS A 5.10: ER 5356Material-no.: 3.3556Composition, typical analysis (% w/w):Mg Mn Fe Si Cr Ti Al5,0 0,1 0,2 0,2 0,1 0,1 RemainderCharacteristics / Applications:Corrosion- and saltwater-proof alloy. Easily anodised. Welding of rolled and castaluminium-magnesium alloys according to DIN 1725 Bl.1 and Bl. 2, like Al Mg 3, Al Mg5, Al Mg Mn, Al Zn Mg 1, G-Al Mg 3/+Si/+Cu, G-Al Mg 5/+Si, G-Al Mg 10, Al Mg Si1. Tank constructions, construction of vehicles, aluminium constructions, shipbuilding,windows, etc. For plates thicker than 15mm preheat to min. 150°C.Mechanical properties of pure welding deposit(Min. values at room temperature):Melting range: 575 – 633°CTensile strength:235 N/mm²Yield strength (0,2%):110 N/mm²Elongation (l=5d): 8 %Electrical conductivity:15 – 19 Sm/mm²Specific gravity:2,64 g/cm³Welding process:TIGShielding gas (DIN EN 439): l 1 (argon)l 3 (argon/helium mixture)Current mode:Alternating currentAvailability: Diameter (mm): 1,6/2,0/2,4/3,2Length (mm): 1000Welding position: according to DIN EN 287PA PB PC PD PE PF PG06/08/Eb/0198