FONTARGEN A/AF 314

FONTARGEN A 400 Ti WAluminium welding rodEN ISO 18273:S Al 1450 (Al 99,5 Ti)DIN 1732:SG – Al 99,5 TiMaterial-no.: 3.0805Composition, typical analysis (% w/w):Fe Si Cu Zn Ti Al0,4 0,2 0,05 0,05 0,1 RemainderCharacteristics / Applications:Aluminium alloy with good fluidity. Weldable in all positions. The Ti-content ensures agrain refinement of the welding deposit. Joint welding of base materials: Al 98; Al 99; Al99,5; E Al; Al 99,8 und Al 99,7. For plates thicker than 15mm preheat to a min. of150°C.Mechanical properties of pure welding deposit(Min. values at room temperature):Melting range: 647 – 658°CTensile strength:65 N/mm²Yield strength (0,2%):20 N/mm²Elongation (l=5d): 35 %Electrical conductivity:34 Sm/mm²Specific gravity:2,71 g/cm³Welding process:WIGShielding gas (DIN EN 439): l 1 (argon)l 3 (argon/helium mixture)Current mode:Alternating currentAvailability:Diameter (mm): on requestLength (mm): 1000Welding positions: according to DIN EN 287PA PB PC PD PE PF PG06/08/Eb/0196