Conventional Systems Technical Manual - Alcad

UPHAUTA RIBAUPHAUTAssemble the flush-mounted boxes using the set of separators,model CEM-001.Note: Use the openings on the sets of separators to pass thecable between the entrance panels.PLACE AND POSITIONING HEIGHTChoose a place for the flush-mounted box so that, when theentrance panel is fitted, rain, sun rays or strong light sourcesdo not adversely affect the video unit. In this way you will avoidcertain undesired problems with video door entry systems withthe visualisation of images such as the ghosting effect causedby strong background light; correct positioning will also preservethe working life of the equipment.Remember to pass the cables through the cable holes beforefitting the flush-mounted box.Position the flush-mounted box vertically and in the directionindicated by the sticker. In this position the support axles areoriented correctly, which will later allow the entrance panel tobe conveniently opened.Position the box in such a way that the top part is at a heightof 1.7m from floor level. Make sure that the box is perfectlyflush with the surface of the wall.Positioning directionA RIBAARRIBAUPHAUT1.7 m105