Conventional Systems Technical Manual - Alcad

COVER FRAMES FOR ENTRANCE PANELFrames manufactured in aluminium. They are used mainly in refurbishing or repair work, when the old entrance panel has to bereplaced by a new but smaller panel. These frames are also useful in installations where the wall on which the entrance panel is tobe located, is uneven or out of true. The frame can either be fixed to the flush-mounted box of the installation or fixed directly to thewall itself. In the latter case, the possibility exists of ordering the frame ready for attachment to the wall.Frames are divided into single, double or triple frames for fitting either one panel (cover frame for single panel), two entrancepanels in parallel (cover frame for double panel) or three entrance panels in parallel (cover frame for triple panel).The frames do not have standard dimensions. It is the user who must define the exact dimensions according to the characteristicsof the installation.Note: Consult the ALCAD web site (www.alcad.net) to learn how to order cover frames for entrance panel.Cod. 9740047MAR-900COVER FRAME FOR SINGLE PANEL3 mmCod. 9740016MAR-901COVER FRAME FOR DOUBLE PANEL3 mmCod. 9740017MAR-902COVER FRAME FOR TRIPLE PANEL3 mm79