Conventional Systems Technical Manual - Alcad

Electronic video door entry installationsVideo unitTelephones andmonitors4,3,2,1Audio unit(Installation with several points of entry)18,17GRF-204cod. 9610030Power supply unitV~,J119Made in SpainJ212 V~V~ 9 10 11 12 13 14 151 2 3 4 7 16 17 18Audio unit16 (Housing estates)Electric lockEntrance panel lampsCommon push-buttonsConnectionActivationConnectionConnectionFrom the dwelling9 10 11 12 13 14 151 2 3 4 7 16 17 189 10 11 12 13 14 151 2 3 4 7 16 17 189 10 11 12 13 14 151 2 3 4 7 16 17 18Using external pushbutton9 10 11 12 13 14 151 2 3 4 7 16 17 18ABR-001ADJUSTMENTDefinition of main panelIt is necessary to define the entrance panel with which telephones/monitorscommunicate when on standby. In electronicvideo door entry installations, this panel will be activated whenthe automatic switch-on function is used from the monitor of adwelling.This panel will be the main panel of the system and must havethe J1 jumper installed.Do the following:In standard installations, leave the J1 jumper installed.In installations with several points of entry, select the mainpanel and remove the J1 jumper from all the other entrancepanels.In installations in housing estates, define the main panel foreach building in the estate and remove the J1 jumpers from allthe other panels.J1GRF-104cod. 9610015Made in Spain19J112 V~V~ 9 10 11 12 13 14 15 1 2 3 4 7 16 17 18Main entrance panelJ1Jumper for the selection of the main panelGRF-104cod. 9610015Made in Spain19J112 V~V~ 9 10 11 12 13 14 15 1 2 3 4 7 16 17 18Other entrance panelsJ1151